Yamaha HTR-6030 - Manual (Page 12)

Quick start guide
8
En
1
Turn on the video monitor connected to this
unit.
2
Press 1
STANDBY/ON on the front panel.
3
Press F
SCENE 1.
“DVD Viewing” appears in the front panel display,
and this unit automatically optimize own status for
the DVD playback.
y
The indicator on the selected SCENE button lights up while
this unit is in the SCENE mode.
4
Start playback of the desired DVD on your
player.
5
Rotate 8
VOLUME to adjust the volume.
When you change the input source or sound field program, the
SCENE mode is deactivated and the indicator on the SCENE
button turns off.
■ Using the other SCENE buttons
In the following cases, try pressing the corresponding
SCENE button to enjoy playback of the desired sources.
Case A: “I want to listen to a music disc from the
connected DVD player as the back ground
music for this room...”
Press F
SCENE 2 (or
E SCENE 2) to select “Disc
Listening”.
Case B: “I want to watch a TV program...”
Press F
SCENE 3 (or
E
SCENE 3) to select “TV
Viewing”.
To use the “TV Viewing” template, you must connect a
cable TV or satellite tuner to this unit in advance. See
page 15 for details.
Step 3: Turn on the power and
press SCENE 1 button
Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set “SP IMP.” to
“6
ΩMIN” before using this unit (see page 13).
EDIT SEARCH MODE PRESET/TUNING FM / AM A/B/C/D/E CATEGORY A / B / C / D / E MEMORY MEMORY DISPLAY TUNING AUTO/MAN'L
Note
Note