ZyXEL Communications P-660H-T Series - Manual (Page 221)

P-660H/HW-T Series User’ Guide
Chapter 20 Menu 2 WAN Backup Setup 220
Metric This field sets this route's priority among the routes the Prestige uses.
The metric represents the "cost of transmission". A router determines the best route
for transmission by choosing a path with the lowest "cost". RIP routing uses hop
count as the measurement of cost, with a minimum of "1" for directly connected
networks. The number must be between "1" and "15"; a number greater than "15"
means the link is down. The smaller the number, the lower the "cost"
When you have completed this menu, press [ENTER] at the prompt “ Press ENTER to Confirm
or ESC to Cancel: ” to save your configuration, or press [ESC] at any time to cancel.
Table 77 Menu 2.1Traffic Redirect Setup
FIELD DESCRIPTION