ZyXEL Communications P-660H-T Series - Manual (Page 393)

P-660H/HW-T Series User’ Guide
Appendix G 392
config edit firewall set <set
#> rule <rule #> destaddr-
range <start ip address> <end
ip address> This command sets a rule to have the Prestige
check for traffic going to this range of
addresses.
config edit firewall set <set
#> rule <rule #> TCP destport-
single <port #> This command sets a rule to have the Prestige
check for TCP traffic with this destination
address. You may repeat this command to
enter various, non-consecutive port numbers.
config edit firewall set <set
#> rule <rule #> TCP destport-
range <start port #> <end port
#> This command sets a rule to have the Prestige
check for TCP traffic with a destination port in
this range.
config edit firewall set <set
#> rule <rule #> UDP destport-
single <port #> This command sets a rule to have the Prestige
check for UDP traffic with this destination
address. You may repeat this command to
enter various, non-consecutive port numbers.
config edit firewall set <set
#> rule <rule #> UDP destport-
range <start port #> <end port
#> This command sets a rule to have the Prestige
check for UDP traffic with a destination port in
this range.
Delete
config delete firewall e-mail This command removes all of the settings for
e-mail alert.
config delete firewall attack This command resets all of the attack
response settings to their defaults.
config delete firewall set
<set #> This command removes the specified set from
the firewall configuration.
config delete firewall set
<set #> rule<rule #> This command removes the specified rule in a
firewall configuration set.
Table 138 Firewall Commands (continued)
FUNCTION COMMAND DESCRIPTION