X-Micro Tech. 400 - Manual (Page 38)

37
‹ When you enter t he Repeat function, the “A” i n will
fl as h.
‹
A s hort-press of NEXT wi ll set t he “A” point, and then
“ B” will flas h.
‹
A s hort-press of NEXT wi ll set t he “B” point. Then t he
s egment bet ween “ A” and “ B” wil l play repeatedl y.
‹
A s hort-press of MEXT/ LAST will cycl e the Repeat
funct ion.
Note:
① In the steps above, hold-on of “Vol+” or “Vol-”
will change the current pl aying s peed.
②
In all the steps above, a s hort-press of MODE wi ll quit
the Repeat interface and return to the Pl aying i nterface.
③
In all the steps above, a s hort-press of PLAY wil l quit the
Repeat interf ace and the Playi ng interf ace, and return to the
Stop interface.
6.2.4
Tempo Rate Setting I nterface
Note: Here, you can set the current playing speed, which wi ll
affect bot h WAV and AG8 files .
The i nterface is as shown in the Fi g bel ow.
Recorded File Playback – Tempo Rat e
But ton Function in the Tempo Rat e Setting Interface
◆
The standard slide bar functi on.
◆ Quit for idling for 5 seconds