Xerox Phaser 3100MFP/S - Manual (Page 49)

Phaser 3100MFP/S
- 45 -
8 - PC Featu
res
6 Once the odd pages are printed, the LCD screen
displays the message **P UT THE PRINTED SHEETS IN
THE PAPER TRAY WITH THE PRINTED SIDE VISIBLE ...:
7 Place the sheets in the paper tray as indicated on
the explanation page and below.
The following illustrations describe the necessary
operations depending on the selected binding
mode:
• Long sides
• Short sides
8 Press OK on the control panel to resume printing.
9 Even pages are printed on the other side of the
sheets. Once all pages are printed, remove the
explanation sheet.
** PUT THE PRIN
... AND PRESS <OK>
Important
The PC generates and prints a page
explaining how to reload the sheets
for a duplex job. Read this page
carefully and place it back with the
other sheets.
it is very important that you return
the explanation sheet to the paper
tray to continue printing correctly.
Important
If a paper jam or a paper size error
occurs, the job is cancelled. You
must then resubmit the print job.