Zhone Technologies 6652-A2 - Manual (Page 2)

Technical Specifications
VDSL2 Bridged/Router
Dimensions
■ W(10.03in) x D(6.29in) x H(1.65in)
Weight
■ 0.75lbs
Power
■ Input 100~240 VAC 50/60Hz
■ Output 12V 1.5A
Interfaces
■ 1 x RJ11 - VDSL2 uplink
■ 4 x RJ45 - 10/100Base-TX Ethernet
■ 1 x ON/OFF Power Switch
■ 1 x Reset
Standards Support
■ VDSL
- ITU-T G.993.2 (VDSL2)
- ITU-T G.993.1 (VDSL1)
- ANSI T1-424
- ETSI TS 101 270-1
- ETSI TS 101 270-2
- China MII VDSL standard
- ITU-T G.994.1 (G.hs) based hand shaking
- Supports band plan 997, 998, FX and China
- VDSL2 profiles 8a/b/c/d, 12a/b, 17a and 30a
- EFM (IEEE802.3ah)
- Extended US0 band up to 276kHz
- VLAN to Port mapping
■ Ethernet Interface
- IEEE 802.3/802.3u compliant
- Support 10/100Mbps operation
- Support half/full duplex operation
- Support IEEE 802.3u clause 28-auto
negotiation
- Support Flow Control
- Support Auto MDI/MDIX
- IP Multicast and IGMP snooping
- Support 802.1d
- IEEE 802.1q
- IEEE 802.1p
- Q-in-Q support
■ Routing
- Static routes
- Dynamic routes: RIPv1 or RIPv2
- PPP client
- IGMP proxy
- DHCP server and client
■ Firewall
- SPI firewall
- Access control list absed on IP and port
- Port forwarding, virtual server
- Support for one DMZ host
- ALG support including FTP, PPTP, L2TP
Protocol Support
■ ITU-T G.993.2
■ ITU-T G.993.1
■ ANSI T1.424
■ ETSI TS 101 270-1
■ ETSI TS 101 270-2
■ RIPv1
■ RIPv2
■ UPnP
■ IGMP proxy
Management
■ Web Interface HTTP
■ Telnet
■ CLI
Regulatory Compliance
■ FCC Part 15/68
■ UL
■ CSA
■ CE
■ RoHS Compliant
Operating Requirements
■ Operating Temperature: 0C to 40C / 32F to
104F
■ Non-Operating Temperature: -20C to 85C / -4F
to 185F
■ Operating Humidity: 5% to 95% Relative
Humidity (Non-Condensing)
■ Non-Operating Humidity: 5% to 95% Relative
Humidity (Non-Condensing)
Ordering Information
6652-A2-200 VDSL2+ 4 Port CPE, NA
6652-A2-302 VDSL2+ 4 Port CPE, EURO
6652-A2-600 VDSL2+ 4 Port CPE, Japan
17 December 2010 11:33:01