ZyXEL Communications ZyAIR G-220 - Manual (Page 42)

ZyAIR G-220 User’s Guide
4-6 Maintenance
4.4 The WEP Key Setting… Screen
To set up wireless LAN security, click Setting next to the WEP field in the Access Point Setting screen to
display the screen as shown.
Figure 4-3 Access Point Mode: Security
Refer to Table 3-3 for field descriptions.
4.5 The MAC Address Filter Screen
The MAC Address Filter screen allows you to configure the ZyAIR to give exclusive access to (Accept)
devices or exclude devices from (Reject) connecting to the ZyAIR. Every Ethernet device has a unique
MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs
of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the
device(s) to configure this screen.