ZyXEL Communications ZyAIR G-220 - Manual (Page 46)

ZyAIR G-220 User’s Guide
5-2 Troubleshooting
Step 2. When prompted, click OK to remove the driver and the utility software.
Figure 5-2 Confirm Uninstall
Step 3. Restart your computer when prompted.
5.3 Upgrading the ZyAIR Utility
Before you uninstall the ZyAIR Utility, take note of the current network
configuration.
To perform the upgrade, follow the steps below.
Step 1.
Download the latest version of the utility from the ZyXEL web site and save the file on your
computer.
Step 2. Follow the steps in Section 5.2 to remove the current ZyAIR Utility from your computer.
Step 3. Restart your computer when prompted.
Step 4. After restarting, refer to the procedure in the Quick Installation Guide to install the new utility.
Step 5. Check the version numbers in the Information… screen to make sure the new utility is
installed properly.