ZyXEL Communications ZyXEL Dimension ES-2048 - Manual (Page 228)

Chapter 27 Access Control
ES-2048 User’s Guide
228
27.3.4 Configuring SNMP
Click Management > Access Control > SNMP to view the screen as shown. Use this screen
to configure your SNMP settings.
Table 87 SNMP Switch Traps
OPTION OBJECT LABEL OBJECT ID DESCRIPTION
stp STPNewRoot 1.3.6.1.2.1.17.0.1 This trap is sent when the STP root
switch changes.
MSTPNewRoot 1.3.6.1.4.1.890.1.5.8.23.107.7
0.1
This trap is sent when the MSTP root
switch changes.
STPTopologyChange 1.3.6.1.2.1.17.0.2 This trap is sent when the STP
topology changes.
MSTPTopologyChange 1.3.6.1.4.1.890.1.5.8.23.107.7
0.2
This trap is sent when the MSTP root
switch changes.
mactable MacTableFullEventOn 1.3.6.1.4.1.890.1.5.8.23.31.2.1 This trap is sent when more than
99% of the MAC table is used.
MacTableFullEventClear 1.3.6.1.4.1.890.1.5.8.23.31.2.2 This trap is sent when less than 95%
of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.2.1.16.0.1 This trap is sent when a variable
goes over the RMON "rising"
threshold.
RmonFallingAlarm 1.3.6.1.2.1.16.0.2 This trap is sent when the variable
falls below the RMON "falling"
threshold.