Yamaha USB-MIDI INTERFACE UX16 - Manual (Page 14)

14
● Selecting the destination for the MIDI signal output
This section explains how to set up the UX16 for use with Windows Media Player
(included in Windows) or an equivalent program. For information on setting up
your sequence software, refer to the owner’s manual for the software.
1. Select [My Computer | Control Panel] and double-click to open “Sounds and
Multimedia (Multimedia).”
For Windows Me users, if you do not see “Sounds and Multimedia” in the “Control
Panel,” click “View all Control Panel options.”
2. Click the “Audio (MIDI)” tab.
3. Click “Preferred device” in “MIDI Music Playback” and select “YAMAHA USB
OUT xx-1.” For Windows Me users, check the “Use only preferred devices”
checkbox.
The variable “xx” represents the device number ( page 22 ). If only one UX16 is
connected, the device number is “0.”
For Windows 98 users, select the driver while “Single instrument” is selected.
If “YAMAHA USB OUT xx-1” is not displayed, the drive has not been installed
correctly. Delete the driver (
page 27 ) and re-install the driver.
4. Click [OK].
Windows 98 Windows Me
NOTE
NOTE
NOTE
NOTE