Yamaha USB-MIDI INTERFACE UX16 - Manual (Page 5)

5
UX16 Features
● 16 channel simultaneous playback
Supports your music production system with one MIDI OUT port (16 channels)
and one MIDI IN port (16 channels).
● Easy Hot Swap Connection
With a USB connection, you can connect and disconnect the USB cable while the
power to the computer is on. The UX16 operates on USB bus power and does not
require a power adaptor.
● Indicators show the operating status
The indicators of USB and MIDI IN/OUT make it easy to verify operation.
● Connect multiple units to expand your system
You can easily expand the number of ports by using a USB hub to connect
multiple UX16 units.
A maximum of 32 units can be connected, but this will depend on your system.
● Supports Windows and Macintosh
The UX16 supports Windows 98/Me/2000 and Mac OS 8.5 or higher (including
OS 9.1).
Notes on USB
Never connect or disconnect a USB cable under any of the following conditions.
Otherwise, the computer may lock up or UX16 functions may be disabled:
• The computer is checking the device or loading the driver.
• The computer is starting or quitting the OS.
•
The computer is in or canceling Save Energy (Sleep) mode.
• A MIDI application program is running.
Also, do not perform any of the following operations. Otherwise, the computer
may lock up or the UX16 functions may be disabled:
•
Do not frequently connect or disconnect the cables.
• Do not place the computer in or cancel Save Energy (Sleep) mode during MIDI
data transfer.
•
Do not connect or disconnect cables, restart the computer, or install the driver
while a large amount of data is being transferred.
If you are using Windows 2000, it may not be possible to suspend/resume, depending
on your USB host controller and other aspects of your system. (Even if this occurs, the
UX16 will operate correctly if you re-connect the USB cable.)
NOTE
NOTE