Zhone Technologies 6238-I2 - Manual (Page 10)

10 6238 Wi-Fi Router with VOIP User’s Guide 6238-A2-ZB20-10
By USB—
Or, you can use the supplied USB cable to connect your computer directly to the
router.
• Connect one end of the USB cable to the USB port (labeled USB Device) on the
back of the router and connect the other end to a free USB port on your PC. Do
not use the LAN ports of the router.
• The Found New Hardware Wizard will open on your PC. See USB Driver
Installation below.
Connect a Printer or Server to the Router
If you have a printer or server that you wish to connect to the router, attach the printer
or server to the port labeled USB Host using the USB cable that comes with the
device.
Connect the Telephone to the Router
There are two ports on the back of your router labeled Phone 1 and Phone 2 for you
to connect up to two telephones to. Use RJ11 cables to connect the telephone(s) to the
router.
Connect the Router to a Phone Jack
• Before connecting the power adapter, connect the router directly to a phone jack
using an RJ11 cable.
• Connect one end of an RJ11 cable to the port labeled Line on the back of the
router and the other end to a wall phone jack.
Connect the Power Adapter
• Complete the process by connecting the AC power adapter to the POWER
connector on the back of the device and plug the adapter into a wall outlet or
power strip.
• Then turn on and boot up your PC and any LAN devices, such as hubs or
switches, and any computers connected to them.