E-45 english, How to use the built-in timer, Display standby/on standby/on timer hour min – Yamaha EMX-220VCD User Manual

Page 53: Time adj, Version 2.0 / playback control, Soft normal max min, Echo

Advertising
background image

E-45

English

ON TIME/time setting mode
[“ON TIME” appears on the display, and soon it is
changed to a time setting mode.]
Set to the time when you want to begin the timer play
by using the HOUR button and the MIN button.

OFF TIME/time setting mode
[“OFF TIME” appears on the display, and soon it is
changed to a time setting mode.]
If necessary, set to the time when you want to finish
the timer play (to turn this unit into the standby mode)
by using the HOUR button and the MIN button. Even
if you do not set the time, it has already been set so
that the timer play finishes after 1 hour.

Note
The TIMER button functions also in the time (ON TIME or
OFF TIME) setting mode. (However, it also turns this unit
into the standby mode.)

3

Press the TIMER button to complete the timer play
setting. (This unit turns into the standby mode.) If you will
still use this unit, press the STANDBY/ON switch to turn
on this unit.

Note

If you continue using this unit after a timer play setting is
made, the source set for the timer play will begin playing
when the time comes in place of the source played at that
time.

To cancel the timer play setting

After the timer play is finished (while the current time is
displayed), press the TIMER button so that “TIMER” goes out
from the display.
If you do not cancel the timer play setting, this unit will turn
on at the same time every day, so it can be used as an
alarm.
*

Unless the AC supply lead is unplugged or there is a
power failure for more than 5 minutes, the time set on the
timer will be retained until it is reset.

How to make time setting in the ON TIME or OFF
TIME mode

For the hour:
Press the HOUR button to change the hour to a higher value.
Press and hold to change continuously.

For the minute:
Use the MIN button and operate it in the same way as you do
to change the hour.

Note

You can also change the hour (or the minute) to a lower
value by pressing the HOUR button (or the MIN button) with
the TIME ADJ button pressed and held.

HOW TO USE THE BUILT-IN TIMER

STANDBY/ON

TIME

A

PROG

B

C

D

+

I0

E

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

9

0

PRESET

INPUT

TIME INDEX

INTRO

DIGEST

KARAOKE

SLEEP

VCD/CD

MUSIC

TUNER

PROGRAM

VOLUME

DISC SKIP

RETURN

PREV

NEXT

SELECT

STOP

PLAY/PAUSE

LEVEL

ECHO/KEY

TEST

CENTER/REAR

/DELAY

RANDOM OPEN/CLOSE

INDEX

MODE

VCD/CD

TUNER

DISPLAY

STANDBY/ON

STANDBY/ON

TIMER

HOUR

MIN

VIDEO CD CHANGER RECEIVER

VIDEO CD

Version 2.0 / Playback Control

PRESET/TUNING/BAND

A/B/C/D/E

OPEN/CLOSE

DISC

1

DISC

2

DISC

3

DISC

CHANGE

VOLUME

INPUT SELECTOR

VCR•LD/TV•VCD/CD•TAPE/MD•TUNER

VCD/CD

TUNER

MIC TONE

MIC

MIC MIXING

SOFT

NORMAL

MAX

MIN

STANDBY/ON

PHONES

KARAOKE

PROGRAM

ECHO

ECHO

MEMORY

MUSIC

DISPLAY

MEMORY

AUTO/MAN’L

REPEAT

TIME

TIME ADJ

TIMER

HOUR

MIN

INPUT TRIM

TIME ADJ

Advertising