Antenna connection, E-15 english, 1) supplied fm antenna – Yamaha AV1 User Manual

Page 17: 2) supplied am (mw/lw) loop antenna, 3) external fm antenna, 4) external am (mw/lw) antenna, Connections

Advertising
background image

E-15

English

ANTENNA

FM

75

UNBAL.

GND

AM

ANTENNA

FM

75

UNBAL.

GND

AM

(1)

(2)

(3)

(4)

ANTENNA

FM

75

UNBAL.

GND

AM

or

Earth rod

7.5 m (25 feet)

15 m (49 feet)

ANTENNA

FM
75

UNBAL.

GND

AM

VIDEO

SIGNAL

TO SW-AV1

AUDIO

OUTPUT

IN

MONITOR OUT

VIDEO 1

OUT

IN

VCR

OUT

IN

TAPE/MD

MARK

SYSTEM

CONNECTOR

Antenna connection

(1) Supplied FM antenna

Connect the FM antenna wire to the corresponding
terminal and direct the FM antenna wire to the direction
where the strongest signal can be received.

(2) Supplied AM (MW/LW) loop antenna

Connect the AM (MW/LW) loop antenna wires to the
corresponding terminals. Position the AM (MW/LW)
loop antenna for optimum reception. Place the AM
(MW/LW) loop antenna on a shelf etc., or install it on
the rack or wall with screws (not provided).

Notes
• When static is still heard even after adjusting the

position of the AM (MW/LW) loop antenna, try
reversing the wire connections (right to left).

• Do not place the AM (MW/LW) loop antenna on the

unit. It will result in noise generation, since the unit
is equipped with digital electronics. Place the AM
(MW/LW) loop antenna away from the unit.

(3) External FM antenna

Use an external FM antenna instead of an indoor FM
antenna if you need better reception. Consult your
dealer.

(4) External AM (MW/LW) antenna

Use an external AM (MW/LW) antenna if you need
better reception. Consult your dealer.

Note
When using an external AM (MW/LW) antenna, be
sure to keep the wire of the AM (MW/LW) loop antenna
connected.

CONNECTIONS

Advertising