X-Micro Tech. WLAN 11g - Manual (Page 34)

page.
s in the static IP address table at the bottom of the
page and, after changing parameters, click Update to confirm the changes.
New: Click New to clear the text boxes and add required information to create a new
entry.
3.4.2 Dynamic
This screen enables you to set NAT parameters.
Update: Select one of the entrie
Delete: Select one of the entries in the static IP address table at the bottom of the page
and click Delete to remove the entry.
NAT: Click the radio buttons to enable or disable NAT.
the radio buttons to set the desired transmit parameters, disabled,
RIP 1, or RIP 2.
IP
Transmit: Click
Receive: Click the radio buttons to set the desired transmit parameters, disabled, R
1, or RIP 2
34