X-Micro Tech. WLAN 11g User Manual

Page 44

Advertising
background image

Enable: Click to enable or disable the DMZ.

DMZ Host IP: Type a host IP address for the DMZ. The computer with this IP

Apply: Click to save the settings.

sic firewall

e

sequence list--the lower the rule number, the higher the priority

address acts as a DMZ host with unlimited Internet access.

3.5.5 Firewall

Rule

This screen enables you to set up the firewall. The router provides ba

functions, by filtering all the packets that enter the router using a set of rules. Th

rules are in an order

the rule has.

Enable: Click to enable or disable the firewall rule profile.

Name: Type a descriptive name for the firewall rule profile.

Action: Select whether to allow or deny packets that conform to the rule.

Inactive Timeout: Type the number of seconds of network inactivity that elapses

before the router refuses the incoming packet.

Source: Defines the source of the incoming packet that the rule is applied to.

● Interface: Select which interface (WAN or LAN) the rule is applied to.

IP Range Start: Type the start IP address that the rule is applied to.

IP Range End: Type the end IP address that the rule is applied to.

44

Advertising