Xerox DocuColor 2045 - Manual (Page 24)

T O O L S M O D E
D O C U C O L O R 2 0 6 0 / 2 0 4 5 S Y S T E M A D M I N I S T R A T I O N G U I D E 1 – 2
Entering Tools Mode
Use the following method to enter the Tools Mode:
1
Press the Access button on the Control Panel. The Access Password Screen
appears.
2
Use the keypad to enter the Tools Mode password. The default password is five
1s (1 1 1 1 1). For security reasons, only asterisks are displayed on the screen.
3
Touch the Enter button on the screen. The Pathway Options screen appears, as
shown in Figure 1.
NOTE: It is recommended that you change the Tools password as soon as
possible after installing the DocuColor 2060/2045 to prevent unauthorized
access to the Tools Mode. The procedure for changing the password is in Chapter
4 of this manual.
Figure 1. Pathway Options screen
4
Touch the Tools Pathway button on the screen. The Machine Defaults 1 screen
appears.