Xerox 8264E EN - Manual (Page 12)

2 Unwinder / Winder Operation
8 100kg Unwinder / Winder User Guide
2.1.4 Winder Control Panel
The Winder Control Panel is used to set the operating mode and to display the status of the Winder.
4
3
2
1
Figure 7. Winder Control Panel
2.1.4.1 Switches
No. Part name Function
1 Automatic
Operation
Switch
● OUTSIDE ROLL: Used when the roll paper is rolled in
the outward direction.
● OFF: Roll-in device is not being operated.
● INSIDE ROLL: Used when the roll paper is rolled in the
inward direction.
2 Manual
Operation
Switch
● NORMAL DRIVE: Roll-in device turns in the forward
direction.
● REVERSAL: Roll-in device turns in the reverse
direction.
2.1.4.2 Indicators
No. Part name State Function
3 Power Lamp Lit ● Power is ON.
● Stand-by.
Blinking During roll-in operation.
Off Power is OFF.
4 Error Lamp Lit Over-current error in roll-in motor.
Blinking Time-out error.
Off No error.