Xerox 8264E EN - Manual (Page 14)

2 Unwinder / Winder Operation
10 100kg Unwinder / Winder User Guide
2.3 Turning the Power ON and OFF
The following section provides procedures for setting the Unwinder / Winder power ON and OFF.
2.3.1 Turning the Power ON
Turn the power ON by following the instructions below.
1. Set the Unwinder / Winder power switch to the ON position. The operation lamp will light.
1
Figure 10. Set the Power Switch to the ON Position
No. Part name
1 Unwinder / Winder Power Switch
2.3.2 Turning the Power OFF
1. Ensure that the printer is stand-by.
2. Set the power switch to the OFF position. The operation lamp will turn off.
1
Figure 11. Set the Power Switch to the OFF Position
No. Part name
1 Unwinder / Winder Power Switch