Sony DPF-D830 - Manual (Page 29)

29 GB
T
ry u
s
in
g
va
riou
s f
u
nc
tio
n
s
Connecting to a computer
1
Connect the AC adaptor to the photo frame, and to the
AC power source.
2
Open the I/O cover.
3
Connect the computer and photo frame with a
commercially available USB cable.
4
Turn the photo frame on.
5
Operate the computer to exchange images with the
internal memory of the photo frame.
System Requirements
x Windows
Recommended OS: Microsoft Windows 7/Windows Vista SP2 /
Windows XP SP3
Port: USB port
x Macintosh
Recommended OS: Mac OS X (v10.4 or later)
Port: USB port
To USB mini B
connector
To USB connector
Computer
P Notes
• Use a mini B-Type USB cable.*
* When you use a commercially
available USB cable, use a
USB cable with a mini B-type
plug (for the USB mini B
connector of this unit, frame-
side connector type) shorter
than 3 meters.
• If multiple USB devices are
connected to a computer or if a
hub is used, a problem may occur.
In such a case, simplify the
connection.
• You cannot operate the photo
frame from another USB device
being used simultaneously.
• Do not disconnect the USB cable
during data communication.
• Operation with all computers that
satisfy the recommended system
requirements is not guaranteed.
• The photo frame has been
demonstrated as operable when
connected to a computer. When
other devices are connected to the
photo frame, these devices may
not recognize the internal memory
of photo frame.
• Do not connect a computer to the
USB mini B connector on the
photo frame simultaneously when
a USB memory is connected to the
EXT INTERFACE (USB A)
connector.
• The I/O cover cannot be closed
with the USB cable connected.