Yard-Man 247.37979 - Manual (Page 16)

16
Note: For some people the drive clutch handle may not be in a comfortable position. You can adjust the handle
out by tightening the adjustment wheel.
SHIFT LEVER CABLE ADJUSTMENT
Periodic adjustment of the six speed shift cable may be required due to normal wear on the cable. Adjustment is
needed if all six speeds do not work.
The adjustable cable bracket is located on the left side of the mower, beside the engine. Follow steps 1 through 7
to adjust the shift lever.
Step 1. Start engine.
Step 2. Place speed control in the sixth speed
position.
Step 3. Stop engine.
Step 4. Disconnect spark plug wire and ground it.
Step 5. Loosen hex nut (A) which secures the
adjustable cable bracket.
Step 6. Push back on the adjustable cable bracket.
Step 7. Tighten hex nut (A).
Bottom View
Speed Control
Lever
Hex Nut (A)
Adjustable Cable Bracket
PUSH