ZyXEL Communications P-660H-Tx v2 - Manual (Page 197)

Chapter 16 System
P-660H-Tx v2 User’s Guide
197
16.2 Time Setting
To change your ZyXEL Device’s time and date, click Maintenance > System > Time
Setting. The screen appears as shown. Use this screen to configure the ZyXEL Device’s time
based on your local time zone.
Figure 112 System Time Setting
Old Password Type the default admin password (1234) or the existing password you use to
access the system for configuring advanced features.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the ZyXEL Device.
Retype to
Confirm
Type the new password again for confirmation.
Apply Click Apply to save your changes to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 71 System General Setup
LABEL DESCRIPTION