ZyXEL Communications PLA-407 - Manual (Page 65)

Chapter 7 Powerline Network Setup Tutorial
PLA-407 User’s Guide
65
3 Select your adapter by selecting Local and type the network name for your
existing network in the Network Name field (C).
Figure 40 Adding an Adapter to an Existing Network
Select Set NMK to this device and click Write. Click OK on the pop-up.
Figure 41 Network Name Pop-up
Your new adapter will now have the same Network Name as your existing
network and so has now joined your existing network.
4 Connect the adapter to the device you want to add to the network, a printer for
this example. Plug the adapter’s power cord into a power outlet and, if required,
switch the power outlet on.
Repeat this procedure for all additional Powerline adapters that you want to add to
your existing or new Powerline network.
7.0.5 Setting Up a New Network with a New Adapter
This section shows you how to use your new Powerline adapters to set up a new
Powerline network separate to your existing network.
The figure below shows two Powerline networks in a house. The first network (1)
shows the home computer connected to a printer and has access to the Internet.
The second network (2) has no Internet access but with a media adapter such as
C