ZyXEL Communications PLA-407 User Manual
Page 78
Chapter 9 LEDs and Troubleshooting
PLA-407 User’s Guide
78
The following table describes the behavior of the lights on the PLA-407.
Table 15 PLA-407 Lights
LIGHTS
ICON COLOR STATU
S
DESCRIPTION
POWER
Green
On
The
PLA-407
is on and receiving power.
Blinking
The
PLA-407
is starting up.
It also indicates the
PLA-407
is trying to
connect with another device using the ENCRYPT
function.
The encryption process failed (120 seconds time
out)
Blinking at the same time as the HomePlug light
indicates an unsuccessful connection if you have
used the ENCRYPT button.
The Power LED blinks when it is in Low Power
mode. Refer to
for
details on this feature.
Off
The
PLA-407
is not receiving power.
HomePlug
Green
On
The
PLA-407
detects another Powerline
adapter. The data transfer rate is greater than
40 Mbps.
Amber
The
PLA-407
detects another Powerline
adapter. The data transfer rate is between
12~20 Mbps.
Red
The
PLA-407
detects another Powerline
adapter. The data transfer rate is between 0~12
Mbps.
Green/
Amber/
Red
Blinking
The
PLA-407
is communicating with another
Powerline adapter. Data is being transmitted
and/or received.
Blinking at the same time as the POWER light
indicates an unsuccessful connection if you have
used the ENCRYPT button.
Off
The HomePlug port does not detect another
Powerline adapter.
ETHERNET
Green
On
The ETHERNET port is on and ready and the
PLA-407
detects a device connected to it.
Blinking
The
PLA-407
is communicating with a
networking device connected to it.
Off
The
PLA-407
does not detect any devices
connected to its ETHERNET port.