Zoom MRS-802 - Manual (Page 153)

Appendix
ZOOM MRS-802
153
● DIMENSION/RESONANCE module
Parameter Description
Type Parameter
DIMENSN
RISE_1 RISE_2
An effect that produces spatial width.
RESONNC
DEPTH FreqOFST RATE TYPE RESO EFX LVL DRY LVL
A resonance filter with LFO.
Parameter Name Setting Range Parameter Description
RISE_1 0 – 30 Adjusts the degree to which the stereo component is emphasized.
RISE_2 0 – 30 Adjusts the spaciousness that includes the monaural component.
DEPTH 0 – 10 Adjusts the depth of the effect.
FreqOFST 1 – 30 Adjusts the LFO offset.
RATE 1 – 30 Adjusts the speed of the effect.
TYPE HPF / LPF / bPF Specifies the type of filter.
RESO 1 – 30 Adds character to the effect.
EFX LVL 0 – 30 Adjusts the mix amount of the effect sound.
DRY LVL 0 – 30 Adjusts the mix amount of the direct sound.
Send/return effect
● CHORUS/DELAY module
Parameter Description
● REVERB module
Parameter Description
Type Parameter
CHORUS
LFO TYPE DEPTH RATE PRE DLY EFX LVL
Stereo chorus with clear sound and great spaciousness.
DELAY
TIME FB DAMP EFX LVL REV_SEND
A delay effect of up to 1000 ms.
DOUBLE
TIME TONE EFX LVL
A doubling effect of up to 100 ms.
Parameter Name Setting Range Parameter Description
LFO TYPE Mn / St Selects the LFO phrase: Mn (monaural) or ST (stereo).
DEPTH 0 – 10 Adjusts the depth of the effect.
RATE 1 – 30 Adjusts the speed of the effect.
PRE DLY 1 – 30 Adjusts the pre-delay time.
EFX LVL 0 – 30 Adjusts the mix amount of the effect sound.
TIME
TYPE = DELAY : 1 – 1000
Adjusts the delay time (x 1 ms).
TYPE = DOUBLE : 1 – 100
FB 0 – 10 Adjusts the amount of feedback.
DAMP 0 – 10 Adjusts the amount of high-frequency decay for the delay sound.
REV_SEND 0 – 30 Adjusts the amount of delay sound that is sent to reverb.
TONE 0 – 10 Adjusts the tone.
Type Parameter
HALL
PRE DLY REV TIME EQ_HIGH EQ_LOW E/R MIX EFX LVL
A reverb effect that produces the reverberation characteristic of a concert hall.
ROOM
PRE DLY REV TIME EQ_HIGH EQ_LOW E/R MIX EFX LVL
A reverb effect that simulates the reverberation of a room.
Parameter Name Setting Range Parameter Description
PRE DLY 1 – 100 Adjusts the pre-delay time.
REV TIME 1 – 30 Adjusts the reverb time.
EQ_HIGH -12 – 6 Adjusts the high-frequency volume of the reverb sound.
EQ_LOW -12 – 6 Adjusts the low-frequency volume of the reverb sound.
E/R MIX 0 – 30 Adjusts the volume of early reflections.
EFX LVL 0 – 30 Adjusts the mix amount of the effect sound.