Zoom MRS-802 - Manual (Page 50)

Reference [Track Editing]
ZOOM MRS-802
50
The display changes to “Trm Src END”.
4.
Use the same procedure as in step 2 to specify the
range end point.
All data after this point will be erased.
If you press the PLAY [ R ] key, the specified range will be
played.
5.
Press the [ENTER] key.
The indication “Trim SURE?” appears on the display.
6.
To execute the trimming operation, press the
[ENTER] key.
By using the [EXIT] key instead of the [ENTER] key, you
can move back to previous screens.
When the trimming operation is executed, the indication
“Trim COMPLETE” appears on the display, and the unit
returns to the track edit menu.
Fade-in/fade-out of specified data
range
You can fade in or fade out the audio data over a specified
range.
N OTE
The fade-in/out command does not simply alter the track
volume. Rather, it rewrites the waveform data and is
therefore not reversible once executed. If you want to retain
the condition before editing, use the capture function for that
track (
→
p. 55).
1.
Refer to steps 1 - 6 of “Basic editing steps” to
select the track/V-take for fade-in or fade-out, and
press the [ENTER] key.
The display changes as follows. This screen lets you specify
the start point for fade-in or fade-out.
2.
Use the cursor left/right keys to move the flashing
section of the counter, and turn the dial to specify
the fade-in or fade-out start point.
You can also specify the point as a mark.
3.
Press the [ENTER] key.
The display changes to “Fade Src END”.
4.
Use the same procedure as in step 2 to specify the
fade-in or fade-out end point.
If you press the PLAY [ R ] key, the specified range of the
specified V-take will be played.
5.
Press the [ENTER] key.
The display changes as follows.
6.
Turn the dial to select the fade-in or fade-out curve.
Curves I-1 to I-3 are for fade-in, and curves O-1 to O-3 are
for fade-out. The three different kinds of curves look as
follows.
Trim Src Trim Src
END
END
0 016300 010 3
00
36
Fade-in
Fade Src Fade Src
START
START
0 0 0 0 001 1
00
0
Fade Src Fade Src
END
END
0 0 4260 003 1
00
42
Fade Src Fade Src
CURVE
CURVE 1-1