Xerox 701P40211 - Manual (Page 106)

Hints and Tips System Guide
10-8 Common Controller
10. If the file size is greater than 1.44 MB, type compress
FileName.txt and press <Enter>. If the file size is less than
1.44 MB, go to “Export the trace file to floppy".
Export the trace file to floppy
To export the trace file to a floppy, perform the following:
1. Insert a blank, formatted floppy into the floppy drive.
2. Type volrmmount -i and press <Enter>.
3. If you used the "compress" command above, type cp
FileName.txt.Z /floppy/floppy0 and press <Enter>. If you
did not use the "compress" command above, type cp
FileName.txt /floppy/floppy0 and press <Enter>.
4. Type eject and press <Enter>.