Xerox 701P40211 - Manual (Page 16)

Gateway Configuration System Guide
2-4 Common Controller
Configuration variables
Of the many parameters that are available for SNMP
configuration, only the ones of common interest to Xerox
customers are shown in the following table:
Enter the following Command Line variables:
-l: -w:
An example of SNMP gateway configuration for the parameters
shown is:
SNMP Gateway Configuration File Section
Data:Entry Name Entry
ValueCommandLine: -l -w
Printer Operator: Janet Jones
Printer Administrator: William Webster
Printer Administrator Location: Room 409
Printer Administrator Phone: 122-0001
Printer Location: Room 444
Table 2-1.
Parameter Name Description
Value
Range Default
Value
CommandLine Turn on/off the following flags:
–l: logging to
SNMP_DEBUG_LOG
–w: logging to window
Printer operator The name of the printer operator String
(0...127) <empty>
Printer administrator The name of the printer
administrator String
(0...127) <empty>
Printer administrator location The location of the office of the
printer administrator String
(0...127) <empty>
Printer administrator Phone The telephone number for
contacting the printer
administrator String
(0...127) <empty>
Printer location The location of the printer String
(0...127) <empty>