Zanussi ZCM 1031 X - Manual (Page 8)

INSTRUCTIONS FOR USE OF CLOCK AND TIMER
(ACCORDING TO THE MODELS)
Setting
To set, press and release the desired function, and within 5 seconds
set the time with + and - buttons.
+ and - buttons.
The + and - buttons increase or decrease the time at a speed
depending on how long the button is pressed.
Setting the time
Press any two buttons (cooking time, end time, minute minder
at the same time, and + or - button to set the desired time. This
deletes any previously set programme and the “AUTO” symbol
flashes.
Manual use
By pressing the manual button the “AUTO” symbol switches off
and the saucepan symbol lights up.
Manual operation can only be enabled after the automatic
programme is over or it has been cancelled.
Automatic use
Press the cooking time or end time button to switch automatically
from the manual to the automatic function.
Semi-automatic use with cooking time setting
Press the cooking time button and set the desired time with + or
-. The AUTO and cooking time symbols light up continuously. The
relay switches on immediately. When the cooking end time
corresponds to the time of day, the relay and cooking time symbol
switch off, the sound signal rings and the AUTO symbol flashes.
Semi-automatic use with end time setting
Press the end time button. The time of day appears on the display.
Set the cooking end time with + button. The AUTO and cooking
time symbols light up continuously. The relay contacts switch on.
When the cooking end time corresponds to the time of day, the
relay and the cooking time symbol switch off. When the cooking
time is up, the AUTO symbol flashes, the sound signal rings and
both the relay and the cooking time button switch off.
A
Minute minder
Cooking time
Cooking end
Manual
Subtract time
Add time
“LED” PROGRAMMER (Fig. 5)
Features
24 hour clock with automatic programme and minute minder.
Functions
Cooking time, cooking end time, manual position, clock,
minute minder, times to be set up to 23 hours 59 minutes.
Fig. 5
Display
4-figures, 7-segments display for cooking times and time of day.
Cooking time and manual function = saucepan symbol
Automatic function = AUTO
Minutes minder = bell symbol
The symbols light up when the corresponding functions are
selected.
Automatic use with cooking time and end time setting
Press the cooking time button and select the length of the cooking
time with + or - button. The “AUTO” and cooking time symbols
light up continuously. The relay switches on. By pressing the
cooking end time button the next cooking end time appears on
the display. Set the cooking end time with + button. The relay
and
the cooking time symbol switch off.
The symbol lights up again when the time of day corresponds to
the cooking start time. When the cooking time is up, the “AUTO”
symbol flashes, the sound signal rings, the cooking time symbol
and the relay switch off.
Minute minder
Press the minute minder button and set the cooking time with
+ or - button.
The bell symbol lights up when the minute minder is operating.
When the set time is up, the audible signal rings and the bell
symbol
switches off.
Audible signal
The audible signal starts at the end of a programme or of the
minute minder function and it lasts for 15 minutes.
To stop it, push any one of the function buttons.
Start programme and check
The programme starts 4 seconds after it has been set.
The programme can be checked at any time by pressing the
corresponding button.
Setting error
A setting error is made if the time of day on the clock falls within
the cooking start and end times.
To correct the setting error, change the cooking time or cooking
end time.
The relays switch off when a setting error is made.
Cancelling a setting
To cancel a setting, press the cooking time button and then press
the - button until 00 00 appears on the display.
A set programme will automatically cancel on completion.
8