Xantrex Technology 200 - Manual (Page 41)

Using the Air Compressor: XPower Powerpack 400 Plus
975-0057-01-01 3-15
To inflate your vehicle, motorcycle, or bicycle tires:
1. Place the valve connector securely on the tire valve stem,
push it as far as possible to allow normal airflow, and
close the thumb latch. If necessary, use a supplied nozzle
adapter.
2. Turn the compressor on, and inflate your tire to the
recommended pressure. Use Table: Pressure
Specifications for Common Items as a guide only.
3. Turn the compressor off after appropriate pressure is
reached.
4. Open the thumb latch and remove the valve connector
from the valve stem.
5. Check air pressure with a pressure gauge.
Inflating Small Sports Equipment
You can use the compressor to inflate small sports equipment
such as balls (soccer balls and footballs).
CAUTION
If the pressure gauge on the compressor indicates
more than twice the recommended pressure for the
object you are inflating, and you have only started
to inflate the object, the valve connector is
incorrectly connected to the valve stem. This may
damage the
XPower Powerpack 400 Plus . Remove
and reattach the valve connector to the valve stem.
Note : Leave the thumb latch in the open position for
storing to relieve pressure on the internal mechanisms.