Yamaha DJX - Manual (Page 97)

97
MIDI FUNCTIONS
Saving Bulk Data/Sampling Data
1
First, set up the connected MIDI device for re-
cording the data.
The actual procedure may differ depending on your particular equip-
ment and software. For example, if you are using the Yamaha MDF3
MIDI Data Filer:
1) Make the appropriate MIDI connections.
2) Set up the MDF3 for recording MIDI data. (Refer to the
MDF3 Owner’s Manual.)
2
On the DJX, select the Bulk Dump Send/Sam-
pling Send function.
Do this in the normal way:
1) Press the FUNCTION button.
2) Select the desired Function parameter with the numeric
keypad: #86 for Bulk Dump Send, or #88 for Sampling Send.
3
At the “BulkSnd?”/“SmplSnd?” prompt above,
set the operation to standby.
Press the + button to start the operation.
The Bulk Dump Send/
Sampling Send functions
cannot be used in the
following conditions:
• While playing a pattern
• In the Song mode
• In one of the Recording
modes
• While calling up a
Performance Setup
• While receiving bulk/
sampling data
If you attempt the function
while in one of the above
conditions, “- - -” appears
in the display and the data
is not transmitted.
MDF3
MIDI IN MIDI OUT DJX
STYLE
F86
FUNCTION
BulkSend
STYLE
YES
FUNCTION
BulkSnd?
STYLE
F88
FUNCTION
SmplSend
STYLE
YES
FUNCTION
SmplSnd?
The actual operation steps for these two functions are identical. The Bulk Dump Send func-
tion saves User Performance Setup and User Song. The Sampling Send function saves only
user-sampled data (“Sampled” voice, #284).
USING BULK DUMP SEND/SAMPLING SEND TO SAVE DATA
USING BULK DUMP SEND/SAMPLING SEND TO SAVE DATA