Yamaha CLAVINOVA CVP-505 - Manual (Page 94)

94 CVP-509/505/503/501 Owner’s Manual
Mixing Console
– Editing the
V
olume and
T
onal Balance –
8
The Master Compressor settings you have edited on page 93 can be saved as the
User Compressor type.
1
Press the [I] (SAVE) button to enter the USER MASTER
COMPRESSOR display.
2
Select the destination to which the User Master compressor is
to be stored, by using the [3 ▲▼] – [6 ▲▼] buttons.
3
Press the [I] (SAVE) button to open the SAVE display.
4
Enter the name of the edited Compressor type (page 27), then
press the [8 ▲] (OK) button.
5
Press the [EXIT] button to return to the previous display.
The saved Compressor type is shown in the TYPE selection at the bottom left of
the MASTER COMPRESSOR display and can be selected in the same way as
the preset types.
Saving Master Compressor Settings
Advanced Features
Refer to the Reference Manual on the website,
Chapter 8.
Converting XG Song Voice to this instru-
ment’s Voice (Song Auto Revoice):
[MIXING CONSOLE] → TAB [E][F] VOL/
VOICE → [G] SET UP
Editing FILTER parameters: [MIXING CONSOLE] → TAB [E][F] FILTER
Editing TUNE parameters:
[MIXING CONSOLE] → TAB [E][F] TUNE
Changing an Effect type:
[MIXING CONSOLE] → TAB [E][F]
EFFECT → [F] TYPE
Editing EQ parameters:
[MIXING CONSOLE] → TAB [E][F] EQ
3
2