Yamaha YZFR1Y(C) - Manual (Page 92)

PERIODIC MAINTENANCE AND ADJUSTMENT
7-37
7
6. Install the turn signal light unit by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11191]
EAU24312
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
2. Remove the socket (together with
the bulb) by pulling it out.
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
1. License plate light unit
2. Screw
1. License plate light bulb
1
2
1
U14B10E0.book Page 37 Friday, November 21, 2008 9:38 AM