Yamaha YZFR1Y(C) - Manual (Page 94)

PERIODIC MAINTENANCE AND ADJUSTMENT
7-39
7
a jack either under each side of the
frame in front of the rear wheel or under
each side of the swingarm. EAU24360
Front wheel
EAU34594
To remove the front wheel
WARNING
EWA10821
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the front wheel axle pinch
bolts, the axle bolt, and then the
brake caliper bolts.
2. Lift the front wheel off the ground
according to the procedure on
page 7-38.
3. Remove the brake hose holder
and reflector on each side by re-
moving the bolt and nut.
4. Remove the brake caliper on each
side by removing the bolts.
5. Remove the axle bolt, push the
wheel axle out from the left side,
and then remove the wheel.
NOTICE: Do not apply the brake
after the brake calipers have
been removed, otherwise the
brake pads will be forced shut.
[ECA11051]
1. Front wheel axle pinch bolt
1 1
1. Brake hose holder
2. Reflector
3. Bolt and nut
4. Brake caliper bolt
5. Brake caliper
6. Axle bolt
1
3
2
4
5
6
U14B10E0.book Page 39 Friday, November 21, 2008 9:38 AM