ZyXEL Communications Buffet Server 15205 - Manual (Page 2)

1
Buffet Server
IMPORTANT SAFEGUARDS
When using this electrical appliance, safety precautions
should always be observed, including the following:
■
READ ALL OF THE INSTRUCTIONS.
■
Close adult supervision must be provided when this
appliance is used by or near children.
■
Using attachments not recommended or sold by
Keystone Manufacturing Co., Inc. may cause hazards.
■
DO NOT allow the cord to hang over the edge of the
counter or touch hot surfaces.
■
Place the Deni Buffet Server securely in the center of
the counter or work space.
■
Do not place near hot gas or electric burner.
■
Do not touch hot surfaces.
■ Turn the thermostat to the OFF position before
plugging in or unplugging.
■
To disconnect, remove plug from wall outlet.
■
CAUTION: The surface will remain warm after the unit
is turned off.
■ Always unplug the unit before attempting to move it.
Extreme caution must be used when moving
appliances containing hot oil or other hot liquids.
■
DO NOT operate with a damaged cord. Return the
appliance to Keystone Manufacturing Company Inc.
for proper service, replacement or repair immediately.
■
Always unplug before cleaning and removing parts.
■
Allow to cool before putting on or taking off parts.
■
Always clean each part individually.
■
Do not use outdoors.
■
Do not use the Deni Buffet Server for other than
intended use.
■
Do not clean with metal scrubbing pads. Pieces can
break off the pad and short circuit the electrical parts,
creating the possibility of an electrical shock.
■
To protect against electrical shock, do not immerse
plug, cord, or motor base in water or any other
liquids.
■
It is recommended that you do not use an extension
cord with this unit. However, if one is used, it must
have a rating equal to or exceeding the rating of the
appliance.
■
DO NOT leave this appliance unattended while in
operation.
■
Do not fill trays more than 2 /
3
full.
■
This unit is for household use only.
■
This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any
way.
SAVE THESE INSTRUCTIONS