Xantrex Technology C40R/50 Remote - Manual (Page 7)

975-0123-01-01 Rev A 1
1 Introduction
Thank you for purchasing the Xantrex C-Series Meter Display . The
C-Series Meter Display is an optional accessory for the C-Series
Multifunction DC controllers C35, C40 and C60. It provides a digital
display of the voltage, current, and amp-hour status for the C-Series
Multifunction DC Controller.
The
C-Series Meter Display comes in two versions:
• the faceplate (DVM/C40), which replaces the front cover.
• the remote (C40R/50 and C40R/100), which can be installed
remotely up to 1,000 feet away from the controller.
Please note that labeling shown on the product photographs in this
guide may not exactly match the unit you purchased.
Figure 1 The Faceplate and Remote
Note: The C40R/50 and C40R/100 comes with either a
50 or 100 foot cable. It can also be installed up to 1,000
feet from the Controller. However, Xantrex does not
provide cables exceeding 100 feet.
The Remote The Faceplate