Yamaha DVX-S100 - Manual (Page 53)

49
SETUP MENU
PLA
YING A DISC
English
Menu groups
Video
Audio
Display
Items
Black Level Control
(U.S.A. and Canada models)
Change the black level of the picture. Select “Lighter” when you
connect to the monitor using VIDEO or S VIDEO terminal. Select
“Darker” when using COMPONENT terminals.
NTSC Disc Output
(U.K., Europe, Australia and General models)
Select video signal format (PAL 60 or NTSC) to be output when
playing NTSC disc.
Speaker Setting DVD-A DVD-V
Adjust the settings to suit your audio system and your listening
environment when DISC DIRECT is functioning. See p.52 for
details.
PCM Down Conversion DVD-A DVD-V
Select how to output the high sampling-frequency audio signals on
a disc that is not copyright-protected. See p.51 for details.
Dolby Digital DVD-A DVD-V
Decide the signal type that output from this unit’s digital outputs.
Select “Bitstream” when connected device has Dolby Digital
decoder. Select “PCM” when not.
DTS Digital Surround DVD-A DVD-V
Decide the signal type that output from this unit’s digital outputs.
Select “Bitstream” when connected device has DTS decoder. Select
“PCM” when not.
MPEG DVD-A DVD-V
(U.K., Europe and Australia models)
Decide the signal type that output from this unit’s digital outputs.
Select “Bitstream” when connected device has MPEG decoder.
Select “PCM” when not.
D. Range Compression DVD-A DVD-V
(Dolby Digital only)
Change the dynamic range for late night viewing. Select “On” to
make it easier to hear dialog etc. even at low volume level.
Audio during Search DVD-A DVD-V VCD
Select whether to have sound during search. Select “Off” if sound
distorted when searching with Dolby Digital or DTS material. With
DVD-Audio, the sound may be heard even if you select “Off”.
Menu Language
Select the preferred language for on-screen messages and setup
menu.
On-Screen Messages
Select whether to show on-screen messages or not.
Options
Lighter Darker
(U.K., Europe and Australia models)
PAL 60
NTSC
(General model)
PAL 60
NTSC
Multi-channel:
Select this when connected to multi-channel
system. There are three sub-items as below.
• Speaker presence and size
• Delay time
• Channel balance
2-channel:
Select this when connected to 2-channel
system.
No Yes
Bitstream PCM
Bitstream PCM
Bitstream PCM
Off On
On Off
(U.S.A. and Canada models)
English
Français Español
(Australia model)
English
Français Deutsch Italiano
Español
(U.K. and Europe models)
English
Français Deutsch Italiano
Español
(General model)
English
On Off
107_S100_38-53_EN 02.5.13, 1:32 PM 49