ZyXEL Communications VL470M - Manual (Page 35)

VIZIO VL420M/VL470M User Manual
Version 3/25/2009 35
www.VIZIO.com
Note: At this point, if a set-top box from your cable or satellite service company is being used, press the
#II button on the remote control and select Skip Scan. Otherwise continue with next step:
h. The Tuner screen will be
displayed. If you are using Cable
Service (with no box), press the
" button on the remote control to
choose CABLE.
i. Press the #II button on the
remote control to go to the next
screen.
j. The Channel Scan screen will be
displayed; default choice is Scan.
k. Press the #II button on the
remote control to start the search
for available channels.
l. If you do not want to scan for
channels at this time, press the "
button on the remote control to
highlight Skip Scan and then
press the #II button. The screen
will now change to show the
progress of the search for Analog
(NTSC) and Digital (ATSC)
channels.
Note: If you select Skip Scan, you can scan channels at a later time by selecting the TV input, then going
to the Menu and selecting the Auto Search option in the TV menu.
Note: DTV digital broadcast is not available in all
areas. Refer to
www.antennaweb.org to get
information about availability in your area, type of
antenna and in which direction to point your
antenna. The channel availability through cable
depends upon which channels your cable operator
supplies in Clear QAM; consult your cable
operator for more information.
m. When finished, the Complete
screen will be displayed to inform
you that the HDTV has completed
the Initial Setup. Press the #II
button on the remote control to
exit and begin watching TV.