Audio menu – ZyXEL Communications VL470M User Manual

Page 43

Advertising
background image

VIZIO VL420M/VL470M User Manual

Version 3/25/2009

43

www.VIZIO.com

Audio Menu

1. Press the MENU button on the remote control and the Picture menu will be shown on the screen.
2. Press

!

or

"

on the remote control to highlight the Audio menu, and then press #II to select it.

3. Press

!

or

"

on the remote control to select an Audio menu option.

4. Once the menu option is highlighted, press $ or # on the remote control to adjust the setting.
5. Press the MENU key once to return to the previous screen or repeatedly to return to your program if

the task has been completed.

Audio Mode

Choose from Flat, Rock, Pop, Classic or Jazz.


Equalizer

To select the options in the Equalizer sub-menu,
press the #II button. A new menu will be displayed
showing the volumes of different frequencies
(pitches).
Starting from lowest to the highest pitch, they are
120 Hz, 500Hz, 1.5 kHz, 5 kHz and 10 kHz.

1. Press # or $ to select the frequency to be

adjusted.

2. Use " or ! to adjust to adjust the

selected frequency to your preference.
Values above 0 will boost the frequency
and values below 0 will attenuate the
frequency.


Note:

The Equalizer adjustment will only be available when SRS TSHD is set to Off.

Balance

Adjust the sound to the left or the right.

SRS TSHD

This option sets the SRS True Surround HD surround sound process. Choose from On or Off.

Note:

When SRS TSHD is ON, Equalizer adjustments are not available.

SRS TruVolume

When the programming switches to a commercial or when changing from channel to channel, volume
fluctuations occur. When turned ON, SRS TruVolume

TM

provides the listener with a comfortable and

consistent volume level.

Digital Audio Out

This option allows selection of the type of processing for the SPDIF (Optical connector) when used with a
Receiver/Amplifier/Home Theater system. Select to choose from OFF, Dolby Digital or PCM.

Speakers

Turn the internal speakers On or Off. You may want to turn the internal speakers off when listening to the
audio through your Home Theater System.

Advertising