Yamakawa DVD-335 - Manual (Page 25)

Brightness:
Setup this item to control the brightness of image, available range from -20 to +20.
Hue:
Setup this item to control the hue of image, available range from -9 to +9.
Contrast:
Setup this item to control the contrast of image, available range from -16 to +16.
Saturation:
Setup this item to control the saturation of image, available range from -9to +9.
Sharpness:
Setup this item to control the sharpness of image, available range as high -medium -low.
Luma Delay:
Setup this item to control the luma delay of image, available range from 0T to 1T.
Gamma:
Setup this item to adjust the image, available range as high -medium -low -none.
System Setup
Video Setup Page
System State System State Menu
Brightness 00 Brightness |||||||||||||||
Hue 00 Hue ||||||||||||||||
Contrast 00 Contrast ||||||||||||||||
Saturation 00 Saturation ||||||||||||||||
Sharpness Low High
Medium
Low
Luma Delay 1T 0T
1T
Gamma None High
Medium
Low
None
Press direction key ¡ ° ¡ ± to re tu rn to s etu p m e n u
24
VIDEO SETUP
The VIDEO Setup lets you also select between different signals for the video outputs.Since
these outputs offer signals permanently there are no special settings required. The P/I-key
on the remote control will also guide you through these settings everytime you press it. The
TV MODE function in the SETUP lets you activate the PROGRESSIVE SCAN Signals for
the VGA, SCART and COMPONENT VIDEO output. Before you select the P-SCAN mode,
please check with the user manual of your display system, whether it does support P-SCAN
signals.