ZyXEL Communications P-2802H(W)(L)-I Series - Manual (Page 149)

Chapter 10 Voice
P-2802H(W)(L)-I Series User’s Guide
149
Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. To access this
screen, click VoIP > Phone Book > Speed Dial.
In peer-to-peer calls, you call another VoIP device directly without going through a VoIP
service provider’s SIP server. Select Non-Proxy (Use IP or URL) in the Type column and
enter the callee’s IP address or domain name. The ZyXEL Device sends SIP INVITE requests
to the peer VoIP device when you use the speed dial entry.
Figure 82 Phone Book > Speed Dial
Each field is described in the following table.
Table 57 Phone Book > Speed Dial
LABEL DESCRIPTION
Speed Dial Use this section to create or edit speed-dial entries.
# Select the speed-dial number you want to use for this phone number.
Number Enter the SIP number you want the ZyXEL Device to call when you dial the speed-
dial number.
Name Enter a name to identify the party you call when you dial the speed-dial number.
You can use up to 127 printable ASCII characters.
Type Select Use Proxy if you want to use one of your SIP accounts to call this phone
number.
Select Non-Proxy (Use IP or URL) if you want to use a different SIP server or if
you want to make a peer-to-peer call. In this case, enter the IP address or domain
name of the SIP server or the other party in the field below.
Add Click this to use the information in the Speed Dial section to update the Speed
Dial Phone Book section.
Speed Dial Phone
Book
Use this section to look at all the speed-dial entries and to erase them.
# This field displays the speed-dial number you should dial to use this entry.