ZyXEL Communications P-2802H(W)(L)-I Series - Manual (Page 301)

Chapter 22 Logs
P-2802H(W)(L)-I Series User’s Guide
301
SIP UnRegistration
Success by SIP:SIP Phone
Number The listed SIP account’s registration was deleted from the SIP
register server.
SIP UnRegistration Fail
by SIP:SIP Phone Number An attempt to delete the listed SIP account’s registration from the
SIP register server failed.
Table 134 RTP Logs
LOG MESSAGE DESCRIPTION
Error, RTP init fail The initialization of an RTP session failed.
Error, Call fail: RTP
connect fail A VoIP phone call failed because the RTP session could not be
established.
Error, RTP connection
cannot close The termination of an RTP session failed.
Table 135 FSM Logs: Caller Side
LOG MESSAGE DESCRIPTION
VoIP Call Start Ph[Phone
Port Number] <- Outgoing
Call Number Someone used a phone connected to the listed phone port to
initiate a VoIP call to the listed destination.
VoIP Call Established
Ph[Phone Port] ->
Outgoing Call Number Someone used a phone connected to the listed phone port to
make a VoIP call to the listed destination.
VoIP Call End Phone[Phone
Port] A VoIP phone call made from a phone connected to the listed
phone port has terminated.
Table 136 FSM Logs: Callee Side
LOG MESSAGE DESCRIPTION
VoIP Call Start from
SIP[SIP Port Number] A VoIP phone call came to the ZyXEL Device from the listed SIP
number.
VoIP Call Established
Ph[Phone Port] <-
Outgoing Call Number A VoIP phone call was set up from the listed SIP number to the
ZyXEL Device.
VoIP Call End Phone[Phone
Port] A VoIP phone call that came into the ZyXEL Device has
terminated.
Table 137 PSTN Logs
LOG MESSAGE DESCRIPTION
PSTN Call Start A PSTN call has been initiated.
PSTN Call End A PSTN call has terminated.
PSTN Call Established A PSTN call has been set up.
Table 133 SIP Logs (continued)
LOG MESSAGE DESCRIPTION