ZyXEL Communications V300-T1 - Manual (Page 5)

V300 Quick Start Guide
4
2 Initial Configuration
This section describes how to use the phone’s LCD screen menus to:
• Set up Your Network Connection
and
• Set up Your Voice Account
The phone does not need to be connected to a computer to do this. However, if you want
to configure your V300 using a computer, see your User’s Guide for information.
"
When entering information, use the # key to cycle between uppercase
(ABC), lowercase (abc), symbol (;:”) and number (123) modes. The
current mode is displayed on the LCD.
Press a key multiple times to access the different characters. For example,
in uppercase mode press 9 four times to enter “Z”.
2.1 Set up Your Network Connection
When you have finished your hardware
connections, look at the LCD screen. The main
screen displays, showing time and date details, as
well as your Voice over Internet (VoIP) account
registration status.
"
When you are using the V300’s menus, press the PHONEBOOK key to
return to the main screen.
When a VoIP account is not successfully registered, No Reg displays. When an account is
successfully registered, the account name displays (1234 in this example).
V
If the LCD displays nothing, recheck your hardware connections. See
section 1.1.
Follow these steps to configure your network settings.
16:00 2007-03-03
1234