ZyXEL Communications V300-T1 - Manual (Page 7)

V300 Quick Start Guide
6
6 The PPPoE Username menu displays.
Press Menu and enter your user name. Press
Menu again when you are done.
7 Press 3 to enter the PPPoE Password menu.
Press Menu. The PPPoE Password menu
displays.
8 Press Menu and enter your password. Press
Menu again when you are done.
You have finished setting up your network connection. Go to section 2.2.
2.1.2 Set Up a Static IP Address
1 If you have an IP address to use, press 2 in the
Adv Setting > Network menu.
2 Select Active (press 1).
3 Press Menu.
4 Press Menu again to activate Static IP.
5 The Static IP menu displays. Select IP Address
(Press 2).
2 Username:
ABC(#to change)
_
1 PPPoE:
3 Password
3 Password:
123(#to change)
_
1 Network:
2 Static IP
2 Static IP:
1 Active
1 Active:
Disable
1 Active:
Enable?
2 Static IP:
2 IP Address