Zanussi ZWF 12380W - Manual (Page 6)

Super Quick
Short cycle for lightly soiled items or for laundry which
needs only freshening up. We recommend you to reduce
the fabrics loading.
Extra Rinse
This appliance is designed for saving energy. If it neces-
sary to rinse the laundry using an extra quantity of water
(extra rinse), select this option. Some additional rinses
will be performed. This option is recommended for people
who are allergic to detergents, and in areas where the
water is very soft.
Start Pause
This button allows you to start or to interrupt the selected
programme.
Delay Start
The programme can be delayed from 30 min - 60 min -
90 min, 2 hours and then by 1 hour up to a maximum of
20 hours by means of this button.
Indicator pilot light (8)
8.1
8.2
8.3
After having pressed the
button 6 the light 8.1
(Wash) and 8.2 (Door) il-
luminate to indicate that
appliance is working and
the door is locked.
The light 8.2 (Door) indicates if the door can be opened:
• The light is on: the door cannot be opened.
• The light is off: the door can be opened.
• The light is flashing: the door is unlocking and soon
can be opened.
The light 8.3 (End) illuminates at the end of the washing
cycle.
5 Display
5.2
5.3 5.1
The display shows the following information:
5.1:
• Duration of the selected programme
After selecting a programme, the duration is displayed
in hours and minutes (for example
). The du-
ration is calculated automatically on the basis of the
maximum recommended load for each type of fabric.
After the programme has started, the time remaining is
updated every minute.
• Alarm codes
In the event of operating problems, some alarm codes
can be displayed, for example
(see paragraph
«What to do if...»).
• Incorrect option selection
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed
at the bottom of the display for a few seconds and the
integrated red light of button 6 start flashing.
• End of programme
When the programme has finished three flashing zeros
(
) are displayed, the pilot light 8.3 and the
pilot light of button 6 go out and the door can be
opened.
• Delayed start
The Selected delay set by pressing the relevant button
appears on the display for a few seconds, then the du-
ration of the selected programme is displayed again.
The delay time value decreases by one unit every hour
and then, when 1 hour remains, every minute.
5.2:
6