Zonet Technology ZEW1542 - Manual (Page 13)

802.11n Wireless CardBus
10
c. 802.1X
1.
Authentication Type: The type selected here must be identical to the type of the
802.1x authentication type you’re using.
2.
Session Resumption: Enable or Disable.
3. Domain Name: Input the domain name of 802.1x authentication. This field will be
grayed out when authentication type is not EAP-FAST.
4. Use Client: If the authentication type is using PEAP or TTLS, you can use the
certificate stored on your computer. If the authentication type is using TLS/Smart
Card, this box is always checked.
5. Allow unauthenticated provision mode: This box is always checked and can not
be modified.
6. Use protected authentication credential: If the authentication type is using
EAP-FAST, you can use protected authentication credential by check this box.
7. Remove: Remove the credential you imported previously.
8.
Import: Import the authentication credential file (PAC or al file format), you’ll be
prompted to select a credential file from your computer.
9. Protocol: Select the protocol of tunneled authentication. This pull-down menu is
only available when authentication type is using PEAP or TTLS. When using
EAP-FAST as authentication type, the protocol setting is always Generic Token
Card and can not be changed.
10. Password Mode: Select the password mode of EAP-FAST authentication mode.
This setting is hidden when the authentication type is not EAP-FAST.