Zonet Technology ZEW1542 - Manual (Page 18)

802.11n Wireless CardBus
15
4.6 QoS
1.
WMM Enable: Enable Wi-Fi Multi-Media
2. WMM - Power Save Enable: Enable WMM Power Save
3. Direct Link Setup Enable: Enable DLS (Direct Link Setup). This function will
greatly improve the data transfer rate between WMM-enabled wireless devices.
MAC Address: Input the MAC address of another WMM-enabled wireless device
you wish to establish a direct link.
Timeout Value: must be between 0~65535 in integer. If the value is zero
represents it always connects. Default value of Timeout Value is 60 seconds.
Tear Down: If you want to remove a specific wireless device from DLS table,
select the device and click this button to remove it.