The programmer – Zanussi ZCE 7500 User Manual

Page 11

Advertising
background image

THE PROGRAMMER

KEY

A

AUTO DISPLAY

B

MINUTE MINDER BUTTON

C

COOKING HOURS BUTTON

D

STOP TIME BUTTON

E

COOKING SYMBOL

F

MANUAL SELECTOR BUTTON

G

DECREASE CONTROL

H

INCREASE CONTROL

NOTE:

STEPS 1 AND 2 BELOW MUST BE
FOLLOWED BEFORE THE OVEN
WILL OPERATE MANUALLY.

1.

SET THE TIME OF DAY

When the cooker is first switched on at the wall the

display flashes. (See Fig.1).

Press buttons ( ) and ( ) together then press

( + ) button until the time of day shows in the
display.

The auto symbol will go out and the cooking symbol

( ) will light (Fig.2).

2.

THE MINUTE MINDER

The minute minder gives an audible reminder at the

end of any period of cooking up to 23 hrs 59 mins.

To set press ( ) symbol and the display shows

0.00 as Fig.3.

Then press ( + ) button until the display shows the

interval you want to time e.g. 5 mins. Display will
read as Fig.4.

At the end of the timed period an audible signal will

sound for up to 7 mins the sound can be stopped by
pressing any of the four left-hand side buttons. The
display will revert back to the time of day after a few
seconds and the bell symbol will go out (Fig.5).

11

THE PROGRAMMER

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Advertising