Yeoman 200 - Manual (Page 6)

SITE REQUIREMENTS
Before installation of this product please read these
instructions fully.
It is very important to also understand the requirements
of the UK Building Regulations (England and Wales -
Document J / Scotland - Part F), along with any local
regulations and working practices that may apply. Should
any conflict occur between these instructions and these
regulations then the regulations shall apply.
All electrical connections should meet the requirements
of UK Building Regulations (England and Wales -
Document P / Scotland - Part N).
Your local Building Control Office would be happy to
advise, should questions arise regarding the requirements
of the regulations.
The Elegance Stove should be fitted by a HETAS (GB
only) registered installer, or approved by your local
building control officer. Your Yeoman dealer should be
able to arrange this service for you.
Your building insurance company may also require you to
inform them that you have installed a new heating
appliance, so check with your insurers that your cover is
still valid after installing the Elegance Stove.
When completing the installation and building works you
should comply with your responsibilities under the Health
and Safety at Work Acts, and any new regulations, which
may be introduced during the lifetime of these
instructions.
A faulty installation could cause danger to the
inhabitants and structure of the building.
6
ELEGANCE STOVE DIMENSIONS
Elegance 200
Elegance 210
Elegance 220
Elegance 240