Zanussi ZRD 185W1 - Manual (Page 7)

7
Using the Appliance
This appliance is designed for domestic use
only, specifically for the storage of edible
foodstuffs.
The appliance is designed to operate in ambient
temperatures (surrounding air temperature) between
10 °C and 32 °C.
If these temperatures are exceeded i.e. colder or
warmer, the appliance will not operate correctly.
Should the ambient temperatures be exceeded for
long periods, the temperature in the freezer section
will rise above -18 °C and food spoilage may occur.
Before Use
Remove all packaging and securing tapes. Wash
inside the appliance with lukewarm water and
bicarbonate of soda (5 ml to 0,5 litre of water). Do not
use soap or detergent as the smell may linger. Dry
thoroughly.
Do not use detergents, abrasive powders,
highly perfumed cleaning products, wax
polishes or products containing alcohol.
)
To Start the Appliance
1. Allow the appliance to stand for 2 hrs after
installation.
2. Plug in the appliance and switch on at the mains
supply.
3. Turn the thermostat control to the required setting.
A setting of 3 - 4 is usually suitable for normal
operation (see thermostat control).
4. Leave the appliance for approximately 2 hours for
the correct temperature to be reached before
placing food inside.
Temperature Control
The Refrigerator
The thermostat control situated inside the fridge
compartment regulates the temperature of the fridge.
The thermostat control is marked from 1-5, the higher
the number, the colder the setting.
Position 0 - Off
Position 1 - minimum coldness
Position 6 - maximum coldness
The temperature will be affected by:
Ambient temperature
How often the door is opened
How much food is stored
Position of the appliance